Using
parted, you can add, delete, and edit partitions and the file systems
located on those partitions. You can also clone partitions.
1. Select the hard disk to be parted
When
you execute parted command without any argument, by default it
selects the first hard disk drive that is available on your system.
In
the following example, it picked /dev/sda automatically as it is the
first hard drive in this system.
# parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted)To choose a different hard disk, use the select command as shown below.
(parted) select /dev/sdb
It
will throw the following error message when it doesn’t find the
given hard disk name.
Error: Error opening /dev/sdb: No medium found Retry/Cancel? y
2. Display all Partitions Using print
Using
the print command, you can view all the available partitions in the
selected hard disk. The print command also displays hard disk
properties such as model, size, sector size and partition table as
shown below.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 269GB 2682MB logical ext4 7 269GB 270GB 524MB logical ext4 8 270GB 366GB 96.8GB logical lvm 6 366GB 370GB 3999MB logical linux-swap(v1) 9 370GB 500GB 130GB logical ext4
3. Create Primary Partition in Selected HDD Using mkpart
mkpart
command is used to create either primary or logical partition with
the START and END disk locations. The below example creates partition
with size around 15GB. The START and END points passed to the mkpart
command are in the units of MBs.
(parted) mkpart primary 106 16179
You
can also enable boot option on a partition as shown below. Linux
reserves 1-4 or 1-3 partition number for primary partition and the
extended partition starts from number 5.
(parted) set 1 boot on
4. Create Logical Partition in Selected HDD Using mkpart
Use
mkpart command to create a new partition of a specific size. This
will create the partition of a specific type such as primary, logical
or extended without creating the file system.
Before
creating the partition, execute a print command to view the current
layout.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical ext2Use mkpart to create a new logical partition with 127GB size as shown below.
(parted) mkpart logical 372737 500000
Execute
the print command to view the new layout as shown below.(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical ext2 9 373GB 500GB 127GB logical (parted)
5. Create a File System on Partition Using mkfs
If
you use fdisk command to partition your hard disk, you need to exit
the fdisk utility, and use the mkfs external program to create a file
system on the partition.
However
using parted utility, you can also create filesystem. Use the
parted’s mkfs command to create a file system on a partition. You
should be careful while doing this, as all the existing data in the
partition will be lost during the file system creation. The supported
filesystems in parted are ext2, mips, fat16, fat32, linux-swap,
reiserfs (if libreiserfs is installed).
Let
us change the file system of partition number 8 (that is shown in the
print output below) from ext4 to ext2 file system.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical ext4 9 364GB 500GB 136GB logical ext4
As
shown below, use the mkfs command to change the file system type of
partition number 8. mkfs command will prompt you for partition number
and file system type.
(parted) mkfs WARNING: you are attempting to use parted to operate on (mkfs) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Warning: The existing file system will be destroyed and all data on the partition will be lost. Do you want to continue? Yes/No? y Partition number? 8 File system type? [ext2]? ext2
Execute
the print command again, to verify that the file system type for
partition number 8 was changed to ex2.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical ext2 9 364GB 500GB 136GB logical ext4 (parted)
6. Create Partition and Filesystem together Using mkpartfs
Using
mkpartfs parted command, you can also create a partitions with a
specific filesystem. This is similar to mkpart, but with the
additional feature of creating file system on a partition.
Before
mkpartfs following is the layout of the partitions.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical
In
the following example, mkpartfs will create a new fat32 partition of
size 127GB.
(parted) mkpartfs logical fat32 372737 500000 WARNING: you are attempting to use parted to operate on (mkpartfs) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release.
As
you see below, the partition number 9 is successfully created.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical 9 373GB 500GB 127GB logical fat32 lba (parted)
7. Resize Partition from One Size to Another Using resize
Using resize parted command, you can increase or decrease the partition size of a partition as shown in the example below.(parted) resize 9 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [373GB]? 373GB End? [500GB]? 450GBAs shown above, parted command will always warn whenever you are attempting to do something dangerous (i.e : rm, resize, mkfs).
The
size of partition 9 is actually reduced from 127GB to 77GB. Verify
that the partition is resized properly using the print command as
shown below.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical 9 373GB 450GB 77.3GB logical fat32 lba
Parted
allows you to type unambiguous abbreviation for commands like “p”
for print, “sel” for select,etc.
8. Copy Data from One Partition to Another Using cp
The
entire data from one partition can be copied to another partition
using the cp command. You should also remember that the content of
the destination will be deleted before copy starts. Make sure that
the destination partition has enough size to hold the data from the
source partition.
Using
the “p” command (print) to display the current partition layout.
(parted) p Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical ext2 9 373GB 450GB 77.3GB logical fat32 lba 10 461GB 500GB 39.2GB logical ext2It is recommended to unmount both source and destination partition before doing copy. In this example we are going to copy the content from partition 8 to partition 10.
The following shows the content of the corresponding partitions before copy.
# mount /dev/sda8 /mnt # cd /mnt # ls -l total 52 -rw-r--r-- 1 root root 0 2011-09-26 22:52 part8 -rw-r--r-- 1 root root 20 2011-09-26 22:52 test.txt # umount /mnt # mount /dev/sda10 /mnt # cd /mnt # ls -l total 48 -rw-r--r-- 1 root root 0 2011-09-26 22:52 part10Use the parted cp command to copy partition 8 to partition 10 as shown below.
(parted) cp 8 10 WARNING: you are attempting to use parted to operate on (cp) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. growing file system... 95% (time left 00:38)error: block relocator should have relocated 517
The
following shows the content of the partition 10 after the copy. As
you see below, the content of partition 8 is copied over
(overwritten) to the partition 10.
# mount /dev/sda10 /mnt # cd /mnt # ls -l total 52 -rw-r--r-- 1 root root 0 2011-09-26 22:52 part8 -rw-r--r-- 1 root root 20 2011-09-26 22:52 test.txt
Note:
When you copy across partitions of different filesystem(for example
src : ext2 and dst : ext4), the destination partition’s file system
is actually converted to the file system of source partition (i.e :
ext2) .
9. Remove Partition from a Selected Hard Disk Uusing rm
To
delete an unwanted or unused partition, use the parted rm command and
specify the partition number as shown below.
(parted) rm Partition number? 9 (parted)
After
the above rm command, the partition number 9 deleted, and the print
command will show you the list of available partitions in /dev/sda
disk as shown below.
(parted) print Model: ATA WDC WD5000BPVT-7 (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 diag 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 266GB 251GB primary ntfs 4 266GB 500GB 23GB extended 5 266GB 316GB 50.0GB logical ext4 6 316GB 324GB 7999MB logical linux-swap(v1) 7 324GB 344GB 20.0GB logical ext4 8 344GB 364GB 20.0GB logical ext2
No comments :
Post a Comment